View STP185N10F3_4418805.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB185N10F3 STP185N10F3
N-channel 100 V, 4.0 m, 120 A, D2PAK, TO-220 STripFETTM Power MOSFET
Preliminary Data
Features
Type STB185N10F3 STP185N10F3 VDSS 100 V 100 V RDS(on) 4.5 m 4.8 m ID 120 A(1) 120 A(1)
3 1 2
3 1
1. Value limited by wire bonding
Ultra low on-resistance 100% avalanche tested
TO-220
D2PAK
Application
Switching application - Automotive Figure 1. Internal schematic diagram
Description
This n-channel enhancement mode Power MOSFET is the latest refinement of STMicroelectronics unique "single feature size" strip-based process with less critical alignment steps and therefore a remarkable manufacturing reproducibility. The resulting transistor shows extremely high packing density for low on resistance, rugged avalanche characteristics and low gate charge.
Table 1.
Device summary
Marking 185N10F3 185N10F3 Package D2PAK TO-220 Packaging Tape and reel Tube
Order codes STB185N10F3 STP185N10F3
August 2008
Rev 1
1/12
www.st.com 12
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
Contents
STB185N10F3 - STP185N10F3
Contents
1 2 3 4 5 6 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test circuit ................................................ 6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2/12
STB185N10F3 - STP185N10F3
Electrical ratings
1
Electrical ratings
Table 2.
Symbol VDS VGS ID (1) ID (1) IDM (2) PTOT
Absolute maximum ratings
Parameter Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC=100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Value 100 20 120 120 480 300 2.0 TBD TBD -55 To 175 Unit V V A A A W W/C V/ns mJ C
dv/dt EAS (3) Tj Tstg
Peak diode recovery voltage slope Single pulse avalanche energy Operating junction temperature storage temperature
1. Current limited by package. 2. Pulse width limited by safe operating area. 3. Starting Tj=25C, ID=60 A, VDD=40 V
Table 3.
Symbol Rthj-case Rthj-a Rthj-pcb(1) Tl
Thermal data
Parameter Thermal resistance junction-case Thermal resistance junction-ambient max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose 62.5 -300 TO-220 0.5 -35 -DPAK Unit C/W C/W C/W C
1. When mounted on FR-4 board, on 1inch, 2oz Cu.
3/12
Electrical characteristics
STB185N10F3 - STP185N10F3
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Test conditions ID = 250 A, VGS= 0 VDS= max rating, VDS= max rating,@125C Min. 100 10 100
200
Typ.
Max.
Unit V A A nA V m m
Gate body leakage current VGS = 20 V (VDS = 0) Gate threshold voltage Static drain-source on resistance VDS= VGS, ID = 250 A VGS= 10 V, ID= 60 A DPAK TO-220 2
4 4.5 4.8
Table 5.
Symbol Ciss Coss Crss Qg Qgs Qgd
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions Min. Typ. TBD TBD TBD 100 TBD TBD TBD Max. Unit pF pF pF nC nC nC
VDS = 25 V, f = 1 MHz, VGS = 0 VDD = 80 V, ID = 120 A, VGS = 10 V (see Figure 3)
Table 6.
Symbol td(on) tr td(off) tf
Dynamic
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 50 V, ID = 60 A RG = 4.7 VGS = 10 V (see Figure 2, Figure 7) Min. Typ. TBD TBD TBD TBD Max. Unit ns ns ns ns
4/12
STB185N10F3 - STP185N10F3
Electrical characteristics
Table 7.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=120 A, VGS=0 ISD=120 A, di/dt = 100 A/s, VDD=30 V, Tj=150C (see Figure 4) TBD TBD TBD Test conditions Min. Typ. Max. 120 480 1.5 Unit A A V ns C A
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300s, duty cycle 1.5%
5/12
Test circuit
STB185N10F3 - STP185N10F3
3
Figure 2.
Test circuit
Switching times test circuit for resistive load Figure 3. Gate charge test circuit
Figure 4.
Test circuit for inductive load Figure 5. switching and diode recovery times
Unclamped inductive load test circuit
Figure 6.
Unclamped inductive waveform
Figure 7.
Switching time waveform
6/12
STB185N10F3 - STP185N10F3
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
7/12
Package mechanical data
STB185N10F3 - STP185N10F3
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
8/12
STB185N10F3 - STP185N10F3
Package mechanical data
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
9/12
Packaging mechanical data
STB185N10F3 - STP185N10F3
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
10/12
STB185N10F3 - STP185N10F3
Revision history
6
Revision history
Table 8.
Date 01-Aug-2007
Document revision history
Revision 1 First version Changes
11/12
STB185N10F3 - STP185N10F3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
12/12

▲Up To Search▲

Price & Availability of STP185N10F3

	To Download STP185N10F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .